Vermont DMV Permit Test

1. Speed limit signs are:

destination signs (guide signs)
service signs
regulatory signs
warning signs

2. To avoid becoming an aggressive driver, you should:

Adjust your schedule to drive during times with the most highway traffic.
Listen to heavy metal music.
Allow enough travel time to reach your destination on schedule.
None of the above.

3. A flashing yellow light:

is used at dangerous intersections.
warns drivers to proceed with caution.
can be found before reaching a sharp curve.
All of the above.

4. What should drivers do when the red lights begin to flash?

5. A driver must use a turn signal at least ______ before making a turn or changing lanes.

6. You hear a siren close by but cannot see where the emergency vehicle is. What do you do?

Stop immediately and activate your emergency flashers.
Stop only if you are sure that the vehicle is headed toward you in the opposite lane.
Pull over to the right side of the road and stop until you are sure the emergency vehicle is not headed toward you.
Keep driving until you are sure the emergency vehicle is headed toward you.

7. A speed restriction sign:

is blue with white lettering.
has a diamond shape.
must be ignored in snow conditions.
shows the recommended speed for a curve/turn.

8. ___________ are the most frequent fatality in work zone crashes.

9. This road sign means:

10. If the entrance lane is too short to allow acceleration to expressway speed, you should:

accelerate to expressway speed and blend with traffic.
reduce your speed to 15 MPH or less and blend with traffic.
enter the expressway and accelerate quickly.
stop and wait for a large space in traffic.

VT DMV Knowledge Test Facts