CDL PRACTICE TEST - GENERAL KNOWLEDGE (CALIFORNIA)

41. If your vehicle is equipped with a front brake limiting valve, to ensure normal stopping power make sure the control is:
in the "neutral" position.
in the "slippery" position.
in the "normal" position.
42. When meeting an oncoming vehicle at night, if the other driver does not put their low beams on, you should:
slow down and look straight ahead in your lane.
look slightly to the right to avoid looking directly at the lights of the oncoming vehicle.
"get back at the other driver" by putting your own high beams on.
43. If your brakes get wet, it can cause them:
to apply unevenly.
to be weak.
All of the above.
44. _______ is the number one cause of death and injury in work zones.
Speeding
Driving too slow for conditions
Excessive heat
45. In a dual air brake system, if one air system is very low on pressure:
either the front or rear brakes will not be operating fully.
you should pump the brakes to restore pressure.
you should drive and brake as you always have.
46. In coming down a long, steep downgrade, which of the following is NOT a factor you should consider to select an appropriate safe speed?
Steepness of the grade
Your schedule
Road conditions
47. How far ahead do most good drivers look?
6 to 8 seconds
12 to 15 seconds
3 to 4 seconds
48. Containerized loads are used:
when the cargo exceeds the weight limit.
when the cargo has been or will be carried by rail or ship.
when transporting liquids.
49. If a worker is close to the roadway in a work zone, you should:
drive at the posted speed limit.
reduce your speed below the posted speed limit.
pull off the road and stop.
50. Total stopping distance equals:
Perception distance + reaction distance + braking distance
Braking distance + viewing distance
Perception distance + braking distance
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More