MA CDL AIR BRAKES PRACTICE TEST

16. Which of the following is NOT a way to determine if your trailer is equipped with ABS (antilock braking system)?
It was built after March 1, 1998.
The letters "ABS" are printed on the side of the steering wheel.
Wheel speed sensor wires are coming from the back of the brakes.
It has yellow ABS malfunction lamps.
17. When parking a trailer without spring brakes, it is very important for safety that you use wheel chocks. Why?
if you don't use wheel chocks, supply air will be sent to the service line instead of going to charge the trailer air tanks.
You may not notice a major leak in the service line until you try to put the brakes on.
The air could leak out of the trailer air tank, releasing its emergency brakes.
None of the above.
18. Perception Distance + Reaction Distance + Brake Lag Distance + Braking Distance = ?
Partial Stopping Distance
Stopping Distance - (minus) Brake Fade Distance
Total Stopping Distance
Total Air Pressure
19. In some vehicles a modulating control valve may be used to:
apply the parking brake.
apply the spring brakes gradually.
decrease the pressure in the brake system.
apply the front brakes.
20. When going down grades, you should:
put the transmission in Neutral.
downshift to a lower gear.
shift up.
rely solely on engine braking to reduce your speed.
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More