CDL PRACTICE TEST - GENERAL KNOWLEDGE (SOUTH DAKOTA)

31. When a tire fails, you must:
hold the steering wheel firmly.
stay off the brake.
get out and check all the tires after you have come to a stop.
All of the above.
32. If your vehicle gets stuck on a railroad track, you should:
stay in the vehicle and call for help.
try to re-start the vehicle.
stay in the vehicle and call your dispatcher or supervisor for instructions.
get out of the vehicle and walk as far away from the tracks as possible.
33. The best way to know what's going on behind and to the sides of your vehicle is to:
ask your passenger(s).
lean out of the window.
use the rear view camera.
check your mirrors regularly.
34. Which of the following is a common cause of truck fires?
loose fuel connections.
Short circuits due to loose connections.
Under-inflated tires and duals that touch.
All of the above.
35. Empty trucks:
have less traction.
are higher than loaded trucks.
require greater stopping distances.
All of the above.
36. Which of the following statements about using turn signals is true?
To keep others from trying to pass you, you should signal just before you turn.
To turn safely you must keep one hand on the wheel.
You should use your turn signals when your vehicle is parked at the side of the road.
None of the above.
37. When checking tires, which of the following is not a problem?
Radial and bias-ply tires used together
4/32 inch tread depth on front tires
Too much air pressure
Cracked valve stems
38. When driving in heavy traffic, the safest speed is:
the posted speed limit.
slightly higher than the speed of other traffic.
the speed of traffic.
slower than the speed of other traffic.
39. With low beams, drivers can see ahead about:
100 feet
15 feet
150 feet
250 feet
40. To correct a drive-wheel skid, you should NOT:
Push in the clutch.
Steer into the skid.
Countersteer.
Stop braking.
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More