CDL GENERAL KNOWLEDGE TEST (MAINE) - PRACTICE TEST
41.
When meeting an oncoming vehicle at night, if the other driver does not put their low beams on, you should:
|
"get back at the other driver" by putting your own high beams on.
|
|
|
slow down and look straight ahead in your lane.
|
|
|
look slightly to the right to avoid looking directly at the lights of the oncoming vehicle.
|
42.
Whenever you are about to pass a pedestrian, bicyclist, or vehicle, you should assume that they:
|
can see you.
|
|
|
will move out of your lane of traffic.
|
|
|
could suddenly move in front of you.
|
43.
When crossing railroad tracks, you should:
|
shift gears while crossing the tracks.
|
|
|
stay in your lane.
|
|
|
stop on the tracks.
|
44.
To reduce driver distraction, you should do all of the following except:
|
Eat while driving.
|
|
|
Plan your route before driving
|
|
|
Pre-program radio stations
|
45.
The emergency equipment must include:
|
Charged and rated fire extinguisher.
|
|
|
Electrical fuses.
|
|
|
All of the above.
|
46.
Placards must be:
|
in a diamond shape.
|
|
|
readable from all 4 directions.
|
|
|
All of the above.
|
47.
During a trip you need to inspect the cargo and its securing devices:
|
every 3 hours or 150 miles.
|
|
|
after every break you take.
|
|
|
All of the above.
|
48.
When you exit a highway using an off ramp that goes downhill and turns at the same time, you should:
|
wait until you are in the curve curved part of the off ramp before downshifting.
|
|
|
get on the curved part of the off ramp, then brake and turn at the same time.
|
|
|
slow down before you get on the curved part of an off ramp.
|
49.
When driving on wet roads, you should:
|
follow the vehicle ahead more closely than under ideal driving conditions.
|
|
|
reduce speed by about one-third.
|
|
|
pull of the road and get some rest.
|
50.
What should you do if your vehicle starts hydroplaning?
|
Apply the brakes and countersteer to regain control of the vehicle.
|
|
|
Accelerate slightly, then push in the clutch to slow down.
|
|
|
Release the accelerator and push in the clutch to let the wheels turn freely.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More