CDL PRACTICE TEST (ME) - GENERAL KNOWLEDGE TEST

31. Which of the following are key steering system parts?
Tie rod, drag link, spindle
Leaf spring, torque rod, front axle hanger
Lug nuts, rims, tire
32. Controlled braking:
involves locking the wheels and then releasing the brakes.
must be used when you need to turn sharply while braking.
can be used to keep your vehicle in a straight line and allow you to turn if necessary.
33. The best way to test the trailer service brakes is to:
accelerate to the maximum possible speed, then apply the trailer brakes fully.
pull forward quickly, then apply the trailer brakes with your hand control.
None of the above.
34. How can you avoid rolling back when you start your vehicle?
Accelerate quickly so the vehicle does not jerk.
Partly engage the clutch before you take your right foot off the brake.
Use stab braking before you engage the clutch.
35. To check the automatic transmission fluid:
the wheel nuts must be loose.
you must go down grades.
the engine may have to be running.
36. You can determine if your vehicle is equipped with ABS (anti-lock braking system) by:
checking if your vehicle was manufactured after March 1, 1998.
checking for a yellow ABS malfunction lamp on the instrument panel.
All of the above.
37. Too much weight on the steering axle can cause:
better handling.
hard steering and damage to the steering axle and tires.
poor traction.
38. Which of the following helps keep the engine cool in hot weather?
Making sure there is enough engine oil.
Making sure the anti-lock braking system is on.
Driving faster to force more air into the radiator.
39. Your vehicle must be equipped with:
Fire extinguisher(s)
Warning devices for parked vehicles
All of the above.
40. In coming down steep downgrades, you should:
select an appropriate speed.
go slowly enough so your brakes don't get too hot.
All of the above.
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More