CDL GENERAL KNOWLEDGE TEST (OREGON) - PRACTICE TEST

11. When backing a trailer, you should:
turn the steering wheel toward the direction you want to go.
try to position your vehicle so you can back on a curved path.
avoid using the brakes.
turn the steering wheel in the opposite direction of the turn.
12. Signaling well before you turn is the best way to:
keep other drivers from trying to pass you.
let oncoming drivers know that you are about to make a turn.
let pedestrians know that you are about to make a turn.
invite other drivers to get around you.
13. If the coolant container is not part of the pressurized system:
you can safely remove the cap and add coolant even when the engine is hot.
you should never remove the radiator cap or any part of the pressurized system until the system has cooled.
you should remove the container cap and wait until the system has cooled.
None of the above.
14. To correct a drive-wheel skid, you should NOT:
Push in the clutch.
Countersteer.
Stop braking.
Steer into the skid.
15. Your vehicle has hydraulic brakes. When you press the brake pedal while driving and the pedal goes to the floor, remember that:
pumping the brake pedal may generate enough hydraulic pressure to stop the vehicle.
shifting into neutral may help slow the vehicle.
the parking brake should never used to slow the vehicle.
All of the above.
16. You must have at least _____ inch tread depth in every major groove on front tires.
3/32
4/32
2/32
6/32
17. The wheels of a large combination vehicle are more likely to lock up when:
the vehicle is lightly loaded.
the vehicle is heavily loaded.
you are traveling in very hot weather.
the trailer has new tires.
18. When going down a long downgrade, the speed of your vehicle will likely:
decrease.
increase.
stay the same.
None of the above.
19. When checking the engine compartment, which of the following should you check?
Engine oil level.
Battery fluid level.
Windshield washer fluid level.
All of the above.
20. Which of the following statements about engine belts and driving in hot weather is true?
You can check v-belt tightness by pressing on the belts.
Loose belts will not turn the water pump and/or fan on properly.
Loose belts will result in overheating.
All of the above.
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More