KY CDL HAZMAT TEST - PRACTICE TEST

21. You should flash your brake lights to warn drivers behind you when:
you see a hazard that will require slowing down.
you see you'll need to slow down.
you see a bus stops in the roadway ahead to unload passengers.
All of the above.
22. What is Gross Vehicle Weight?
The total weight of a single vehicle, including its load
The total weight of a combination of vehicles excluding the load
The total weight of the cargo
The total weight of a single vehicle, excluding its load
23. If the vehicle ahead of you is smaller than yours:
it can probably stop faster than you can.
it will take the same amount of time to stop.
it will usually take longer to stop.
All of the above.
24. If you must stop on a one-way or divided highway, you should place warning devices _______ toward the approaching traffic.
5, 25 and 50 feet
3, 15 and 45 feet
10, 100 and 200 feet
5, 50 and 500 feet
25. Overloading can have bad effects on all of the following except:
Speed control
Braking
Steering
Exhaust system
26. When should you downshift automatic transmissions?
When you want to go faster.
When you start to get drowsy.
When going down steep grades.
Watch your tachometer, and downshift when your engine reaches the top of the range.
27. You had to drive onto the right shoulder to avoid a crash. You are now driving at 40 mph on the shoulder. How should you move back onto the pavement?
Brake hard to slow the vehicle, then steer sharply onto the pavement.
Keep moving at the present speed and steer very gently back onto the pavement.
If the shoulder is clear, stay on it until your vehicle has come to a stop, then move back onto the pavement when it is safe.
None of the above.
28. Placards identifying hazardous materials must be placed:
inside the trailer.
on the outside of the vehicle.
inside the cab.
All of the above.
29. If you are being tailgated, you should do all of the following except:
Turn on your taillights
Try to let the other vehicle pass
Increase your following distance
Reduce your speed gradually
30. A shipping paper for HazMat must include:
a proper shipping description for each HazMat.
page numbers if the shipping paper has more than 1 page.
a shipper's certification signed by the shipper.
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More