CDL COMBINATION PRACTICE TEST (IL)

11. ABS will:
increase your average speed.
not give you more control over the vehicle during braking.
shorten your stopping distance.
not change your normal braking capability.
12. What is the minimum tread depth for tires other than front tires?
4/32 inch
2/32 inch
8/32 inch
4/16 inch
13. Which of the following makes a rollover more likely?
Turning too fast.
If the load is to one side so it makes a trailer lean.
Weight that is loaded so there is a high center of gravity.
All of the above.
14. When you use your mirrors while driving on the road, you should:
only use the driver's side mirror.
stare for a long time at the mirror.
check them quickly.
avoid checking them regularly.
15. You are coupling a semi-trailer to your tractor but have not yet backed under. The trailer is at the right height when:
the locking jaws are around the head of the kingpin.
it will be raised slightly when the tractor is backed under it.
the end of the kingpin is even with the top of the fifth wheel.
None of the above.
16. If your truck has automatic transmission, you should downshift:
whenever road conditions allow.
after entering a curve.
when you need to accelerate.
when going down grades.
17. Which of the following is NOT part of inspecting the coupling?
Checking that the locking lever is in the "lock" position
Making sure the fifth-wheel jaws have closed around the shank of the kingpin.
Checking for enough clearance between the rear of the tractor frame and the landing gear.
Making sure there is no space between the upper and the lower fifth-wheel
18. If driving a heavy vehicle, you should:
stay in the left lane.
stay in the right lane.
try to pass other vehicles going uphill.
avoid braking.
19. On a tractor-trailer equipped with a trailer brake hand valve, the hand valve can be used to:
reduce the chance of the front wheels skidding.
hold compressed air.
prevent movement of cargo.
keep from rolling back.
20. What happens when the center of gravity of a truck moves higher up from the road?
It is easier it is to turn around corners.
The vehicle is more stable while turning.
The truck becomes easier to turn over.
It becomes much easier to downshift at the right rpm.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More