MI CDL COMBINATION PRACTICE TEST

11. To test the tractor-semitrailer connection for security:
plug the electrical cord into the trailer and fasten the safety catch.
pull out the air supply knob.
check that the trailer is locked onto the tractor by pulling the tractor gently forward while the trailer brakes are still locked.
12. The only way to stop a front-wheel skid is to:
let the vehicle slow down.
supply more power to the drive wheels.
countersteer.
13. Before driving a vehicle with a dual air brake system, you should allow time for the air compressor to build up a minimum of ____ pressure in both the primary and secondary systems.
150 psi
50 psi
100 psi
14. Banked curves:
can be taken at any speed.
should always be avoided.
have a safe "design speed".
15. When backing a truck you should:
look straight ahead.
get out and walk around the vehicle before you begin to back.
always rely on your mirrors.
16. Which of the following may have reduced the clearances since the heights were posted at bridges and overpasses?
Rain
The weight of a cargo
Repaving of the road
17. A bridge formula permits:
more maximum axle weight for axles that are closer together.
less maximum axle weight for axles that are far apart.
less maximum axle weight for axles that are close together.
18. When you drive a tractor-trailer combination with ABS, you should:
brake as you always have.
pump the brakes.
apply the trailer hand brake whe braking.
19. Combination vehicles _________ than single CMVs.
are much easier to drive
are safer in bad weather
require more driving skill
20. Which of the following is true about the trailer hand valve?
The trailer hand valve works the trailer brakes.
It should be used only to test the trailer brakes.
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More