NEW MEXICO CDL COMBINATION PRACTICE TEST

11. If the drive wheels start to skid:
accelerate slightly to regain control.
push in the clutch to let them turn freely.
use the brakes to slow down.
12. A truck tractor with _________ requires the shortest stopping distance.
an empty trailer
a fully loaded trailer
a lightly loaded trailer
13. The use of brakes on a steep downgrade is:
the main braking factor.
much more effective than the engine braking effect.
a supplement to the braking effect of the engine.
14. Which of these is NOT part of the basic method for shifting up?
Accelerate while pressing the clutch and turn toward the driver's side.
Push in the clutch and shift to the higher gear at the same time.
Release the accelerator, push in the clutch and shift to neutral at the same time.
15. Before driving a vehicle with a dual air brake system, you should allow time for the air compressor to build up a minimum of ____ pressure in both the primary and secondary systems.
100 psi
50 psi
150 psi
16. If you try to couple when the trailer is too low:
the tractor could roll away.
it might not couple correctly.
the tractor may strike and damage the trailer nose.
17. Which of the following is NOT part of testing the tractor protection valve?
Charging the trailer air brake system.
Stepping on and off the brake pedal several times to reduce the air pressure in the tanks.
Pulling forward slowly, then applying the trailer brakes.
18. Glad hands are:
coupling devices.
warning devices.
securement devices.
19. If the ABS is not working:
the vehicle will have no brakes.
you still have normal brake functions.
the vehicle will have weak brakes.
20. The best way to test the trailer service brakes is to:
pull forward quickly, then apply the trailer brakes with your hand control.
accelerate to the maximum possible speed, then apply the trailer brakes fully.
None of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More