CDL COMBINATION PRACTICE TEST (SC)

11. You should use chocks when parking a trailer without spring brakes because:
the brakes will hold only as long as there is air pressure in the trailer air tank.
it is required by law.
it helps prevent brake failure.
it helps prevent skids.
12. When driving a combination vehicle, which of the following 2 things will help you prevent a rollover?
Keeping cargo near the center of the vehicle and driving slowly on turns.
Keeping cargo near the center of the vehicle and driving slowly on the highway.
Keeping cargo near the ground and driving slowly on the highway.
Keeping the cargo near the ground and driving slowly around turns.
13. If you are being tailgated, you should:
turn on your taillights.
drive on the shoulder.
try to let the other vehicle pass.
speed up.
14. Emergency lines on combination vehicles are often coded with the color ____ to keep from getting them mixed up with the ____ service line.
blue; red
red; yellow
yellow; black
red; blue
15. You are coupling a tractor to a semi-trailer. After checking the trailer height but before supplying air to the trailer, you should:
raise the front trailer supports.
lock the trailer brakes.
connect the air lines to the trailer.
inspect the fifth-wheel.
16. When should you use chocks to park a trailer without spring brakes?
Only when parking uphill
Only when parking downhill
Always
Never
17. The best way to recognize that your trailer has started to skid is:
by hearing squeaking noises from the wheels.
by using retarders.
by seeing it in your mirrors.
None of the above.
18. After starting the engine, oil pressure should rise to a normal level:
within 6 minutes.
within 3 miles.
within 2 minutes.
within seconds.
19. If you are feeling sleepy, you should:
slow down and drive on the shoulder of the road.
pull off the road and rest or take a nap.
increase your speed to get to the destination quicker.
None of the above.
20. Before driving a vehicle with a dual air brake system, you should allow time for the air compressor to build up a minimum of ____ pressure in both the primary and secondary systems.
35 psi
150 psi
50 psi
100 psi
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More