COMBINATION PRACTICE TEST - WI CDL

11. Strong winds can make it difficult to stay in your lane especially when driving:
vehicles with ABS.
heavier vehicles.
lighter vehicles.
flatbed trailers.
12. If your vehicle catches fire, you should pull over:
in an open area.
near other vehicles.
near trees.
at a service station.
13. When coupling, you should:
make sure the sliding fifth-wheel is locked.
be aware that wrong coupling and uncoupling can be very dangerous.
make sure the trailer wheels are not chocked.
make sure the trailer kingpin is bent.
14. When the wheels of a trailer lock up, the trailer will tend to swing around. This is more likely to happen when:
the trailer is fully loaded.
the trailer is empty or lightly loaded.
the trailer is overloaded.
None of the above.
15. If your trailer starts to skid, you should:
steer in the opposite direction.
lock the brakes.
release the brakes.
pump the brakes.
16. When the ______ closes, it stops any air from going out of the tractor.
height control valve
alcohol evaporator
hand valve
tractor protection valve
17. The emergency air line does NOT:
pump air into the relay valves, allowing the trailer brakes to be applied more quickly.
supply air to the trailer air tanks.
control the emergency brakes on combination vehicles.
cause the tractor protection valve to close when the emergency line loses pressure.
18. If your truck has automatic transmission, you should downshift:
after entering a curve.
when going down grades.
when you need to accelerate.
whenever road conditions allow.
19. If your cargo only fills one-third of the length of your trailer, make sure your cargo is:
to one side and as close to the ground as possible.
loaded so there is a high center of gravity.
piled up high with heavy cargo on top.
centered and spread out as much as possible.
20. A bridge formula permits less maximum axle weight for axles that:
are closer together
have a high center of gravity
are further apart than normal
have poor weight balance
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More