SCHOOL BUS CDL TEST AK - PRACTICE TEST

11. When unloading students along the school bus route:
Have the students remain seated until told to exit.
Count the number of students while unloading to confirm the location of all students before pulling away from the stop.
All of the above.
12. If the drive wheels begin to spin, you should:
take your foot off the accelerator.
accelerate smoothly and change gears as necessary.
apply your brakes all the way.
13. Always check the interior of the bus before driving, including:
Emergency exit handles
Floor covering
All of the above.
14. Before driving your bus, to be sure it's safe you should:
ask the shipper for the Safety Confirmation report.
review the bus safety guidelines.
review the inspection report made by the previous driver.
15. When driving in a construction zone, if a construction worker is near the road, you should:
further reduce your speed.
maintain a constant speed.
come to a complete stop.
16. When stopping, drivers should bring the school bus to a full stop with the front bumper at least ______ away from students at the bus stop.
10 feet
30 feet
50 feet
17. When confronted by an aggressive driver you should not:
make eye contact.
try to get out of their way.
put aside your pride.
18. For safety during a trip, you should:
use your senses to check for problems.
drive on the shoulder of the road.
shift into a lower gear.
19. The stop signal arm and flashing red signals of a school bus must be used only:
during sharp turns.
when the school bus is stopped on a street or highway to load or unload students.
in heavy traffic.
20. When unloading students, a bus driver should:
tell students to exit the bus and walk to a position where they can plainly see the driver.
count the number of students to confirm the location of all of them before pulling away from the stop.
check around and underneath the bus.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More