Save Time and Get a Pass Guarantee! LIMITED-TIME OFFER: Get CDL PREMIUM Now and SAVE $64! Upgrade To Premium

CDL COMBINATION PRACTICE TEST (CT)

View instructions
Drivers who want to drive combination vehicles must pass the combination vehicles test. The Connecticut CDL combination test consists of 20 questions, and you'll need at least 16 correct answers to pass (80%). The test covers the combination vehicles section of the Connecticut CDL Manual. Take this practice test now to prepare for the actual CT CDL combination test!
1. Who is responsible for inspecting the cargo?
The driver
The shipper
The motor carrier
The person who loaded and secured the cargo
2. The posted speed limit:
is only a suggestion.
may only be exceeded when driving in rural areas.
should only be exceeded when passing other vehicles.
should never be exceeded.
3. Banked curves:
have a safe "design speed".
can be taken at any speed.
are reserved for pedestrians.
should always be avoided.
4. When you parkĀ trailers without spring brakes, you should use wheel chocks:
to prevent the transmission from shifting up.
to keep the trailer from moving.
to prevent air from escaping.
to preventĀ overheating.
5. Which of these statements is true?
Large combination vehicles take longer to stop when they are fully loaded than when they are empty.
Trailer skids are more likely to happen when the trailer is empty or lightly loaded.
"Bobtail" tractors can take longer to stop than a combination vehicle loaded to maximum gross weight.
All of the above.
6. Do NOT use the parking brakes:
to test that they work.
if the brakes are very hot.
when you park for less than two hours.
when you leave your vehicle.
7. What are the two basic reasons for covering cargo?
To protect the cargo from pilferage and from weather.
To protect the cargo from weather and to avoid littering.
To protect people from spilled cargo and the cargo from weather.
To protect people from spilled cargo and the cargo from pilferage.
8. When you get ready to back under the semi-trailer, you should:
back under the trailer at an angle to avoid pushing the trailer sideways.
line up the kingpin to engage the driver's side locking jaw first.
line up directly in front of the trailer.
line up about 15 degrees off the line of the trailer.
9. During your inspection, you should look into the fifth-wheel gap and check that the _________ are fully closed around the kingpin.
locking jaws
mounting bolts
lug nuts
couplings (U-joints)
10. "Bobtail" tractors are:
tractors with two trailers.
heavily loaded trailers.
tractors without semitrailers.
tractors with a tank.
 
Page 1 of 2
Next page  
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More
Rate This Free Test
4.6 out of 5
based on 308 votes

CT CDL Combination Test

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test