DC CDL SCHOOL BUS TEST - PRACTICE TEST

11. When approaching an emergency vehicle stopped on the side of the road with lights flashing, you should:
move to the lane not next to that of the emergency vehicle.
stay in the right lane.
yielding the right-of-way by coming to a complete stop.
speed up.
12. To ensure rider safety, bus drivers should always check the interior of the bus before driving. Aisles and stairwells should always be:
placarded.
reserved for seniors.
clean.
clear.
13. When unloading students, you should:
get off the bus and stand right next to it.
invite the students to head toward the door while the bus is still moving.
have the students remain seated until told to exit.
None of the above.
14. When stopping to pick up students at the bus stop, which of the following comes after all the others?
Place the transmission in park or in neutral and set the parking brake.
Activate the alternating amber lights and open the door when traffic is a safe distance from the school bus.
Activate the alternating red lights when traffic is a safe distance from the school bus.
Check to confirm that all traffic has stopped before opening the door and signaling students to approach.
15. When stopping you should push the brake pedal down:
repeatedly.
gradually.
as hard as you can.
quickly.
16. The inside rearview mirror is used to:
see the "danger zone" areas insde the bus.
see the "danger zone" areas around the bus.
see hazards ahead.
monitor passenger activity inside the bus.
17. After stopping, you should:
Turn on the right turn signal indicator.
Activate the alternating red lights and ensure the stop arm is extended.
Activate the alternating amber lights and ensure the stop arm is extended.
Have the students board the school bus as quickly as possible.
18. Rough acceleration:
is recommended during long trips.
improves gas mileage.
can cause mechanical damage.
is necessary to warm up the engine.
19. If you are loading students along the route and cannot account for a student, you should:
ask other students if they saw the missing students.
call the relevant authorities.
secure the bus, take the key and check around and underneath the bus.
secure the bus, adjust the mirrors and prepare to leave.
20. If your bus gets stuck on a railroad track, the students:
should be evacuated and stand near the bus.
should remain on the bus.
should be evacuated and moved as far away from the tracks as possible.
None of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More