ILLINOIS SCHOOL BUS CDL PRACTICE TEST

11. When making a turn you should:
make gestures to get the attention of other drivers.
honk your horn.
signal early.
turn the signal off before entering the turn.
12. Vehicles with ABS have ______ malfunction lamps on the bus’s instrument panel to tell you if something is not working.
orange
blue
yellow
red
13. When unloading students along the school bus route:
Have the students remain seated until told to exit.
Count the number of students while unloading to confirm the location of all students before pulling away from the stop.
Check all mirrors.
All of the above.
14. The stop signal arm and flashing red signals of a school bus must be used only:
during sharp turns.
in heavy traffic.
in heavy rain.
when the school bus is stopped on a street or highway to load or unload students.
15. Watch out for black ice:
when it is snowing.
any time the temperature is below freezing and the road looks wet.
when the temperature is above freezing and the road is dry.
right after it starts to rain.
16. The brake and accelerator interlock system (if your bus has one):
should be used in place of the service brake.
applies the brakes when the rear door is closed.
should never be used in place of the parking brake.
is used to shut the air off and put on the trailer emergency brakes.
17. Vehicles that are required to stop at railroad crossings must stop no closer than _____ from the nearest rail of the nearest track.
15 feet
10 feet
25 feet
50 feet
18. When stopping you should push the brake pedal down:
repeatedly.
quickly.
gradually.
as hard as you can.
19. When approaching the bus stop, you should activate the lights approximately _______ before the bus stop.
15 seconds
5-10 seconds
4-6 seconds
25 seconds
20. When driving in a construction zone, if a construction worker is near the road, you should:
speed up.
maintain a constant speed.
come to a complete stop.
further reduce your speed.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More