SCHOOL BUS CDL TEST IN - PRACTICE TEST
11.
Engine oil pressure should come up to normal within _________ after the engine is started.
|
five minutes
|
|
|
ten minutes
|
|
|
seconds
|
|
|
two minutes
|
12.
In addition to checking for spare electrical fuses, 3 red reflective triangles and a properly charged and rated fire extinguisher, school bus drivers must also inspect the following emergency equipment:
|
3 liquid burning flares.
|
|
|
Exterior and interior locking
devices.
|
|
|
Emergency kit and body fluid cleanup kit.
|
|
|
None of the above.
|
13.
When driving in fog, drivers should:
|
use windshield washer antifreeze.
|
|
|
use low beams.
|
|
|
use the windshield wipers.
|
|
|
use high beams.
|
14.
Passive railroad crossings:
|
do not have any type of traffic control device.
|
|
|
do not have yellow circular advance warning signs, pavement markings and crossbucks.
|
|
|
do not require you to stop.
|
|
|
All of the above.
|
15.
When students load and unload, what should the driver do?
|
plan the route.
|
|
|
supervise the process.
|
|
|
ask the students to be quick.
|
|
|
All of the above.
|
16.
Before leaving a bus stop, you should:
|
walk through the bus to check for sleeping students.
|
|
|
walk through the bus to check for items left by students.
|
|
|
walk through the bus and around the bus to look for open windows and doors.
|
|
|
make sure no students are around or returning to the bus.
|
17.
If you are being tailgated, you should:
|
turn on your taillights.
|
|
|
make quick changes.
|
|
|
open up room in front of you.
|
|
|
increase your speed very gradually.
|
18.
Properly adjusted mirrors on a school bus should allow the driver to see:
|
under the school bus.
|
|
|
the vehicles in front of the bus.
|
|
|
the front tires touching the ground.
|
|
|
the sides of the school bus.
|
19.
If your bus has a manual transmission:
|
cross the railroad tracks in a low gear.
|
|
|
never change gears while crossing railroad tracks.
|
|
|
at a multiple-track crossing, stop only before the first set of tracks.
|
|
|
All of the above.
|
20.
Rims with welding repairs:
|
are not safe.
|
|
|
can be used for tires in the rear of the vehicle.
|
|
|
can be used for tires in the front of the vehicle.
|
|
|
are acceptable only when carrying a heavy load.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More