SCHOOL BUS CDL TEST MD - PRACTICE TEST

11. When stopping to pick up students, you should place the vehicle in:
neutral.
park.
reverse.
in second gear.
12. If your bus leans toward the outside on a banked curve:
you are driving too fast.
you are braking too hard.
you are turning too soon.
you are driving too slow.
13. Passive railroad crossings:
do not require you to stop.
do not have yellow circular advance warning signs, pavement markings and crossbucks.
do not have any type of traffic control device.
All of the above.
14. The outside convex mirrors are located:
below the outside flat mirrors.
above the windshield on the driver's side area of the bus.
on top of the bus.
above the outside flat mirrors.
15. The driver's seat of a bus should have:
a seat belt.
an emergency exit handle.
a brake and accelerator interlock system.
a pocket for storage.
16. At passive railroad crossings, even if there are active railroad signals that indicate the tracks are clear, you must _________  to be sure it is safe to proceed.
go, look and put the transmission in neutral
stop, look, and listen
go, stop and listen
listen, look and stop
17. When boarding the bus, students should:
not use the handrail.
be quick.
be in single file.
be in pairs.
18. Select the best answer. Danger zones are located:
in the front of the bus.
to the rear of the bus.
on all sides of the bus.
to the sides of the bus.
19. A passive railroad crossing is one that:
does not have any type of traffic control device.
requires you to stop and wait until the traffic control device installed at the crossing tells you to proceed.
has a traffic control device installed at the crossing to regulate traffic.
has at least two traffic control devices installed at the crossing to regulate traffic.
20. Antifreeze:
helps the engine under hot conditions as well as cold conditions.
helps the engine only when the temperature is below freezing.
doesn't help the engine in any way.
helps the engine only under hot conditions.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More