MS CDL SCHOOL BUS TEST - PRACTICE TEST

11. If the drive wheels begin to spin when accelerating, you should:
continue to accelerate.
set the parking brake.
take your foot off the accelerator.
brake gently.
12. Brakes out of adjustment can cause the other brakes to:
overheat and fade.
last longer.
work better.
apply more braking power.
13. While driving, the school bus driver:
does not need to wear a seatbelt.
must wear a seat belt.
must wear a seat belt only if licensed for less than a year.
must wear a seat belt during usual school hours.
14. When approaching the bus stop, you should activate the lights approximately _______ before the bus stop.
25 seconds
4-6 seconds
15 seconds
5-10 seconds
15. ABS:
improves your visibility at night.
helps you increase your following distance.
does not decrease your stopping distance.
helps you increase your average speed.
16. If your bus leans toward the outside on a banked curve:
you are braking too hard.
you are driving too slow.
you are turning too soon.
you are driving too fast.
17. After stopping, you should:
Activate the alternating red lights and ensure the stop arm is extended.
Turn on the right turn signal indicator.
Have the students board the school bus as quickly as possible.
Activate the alternating amber lights and ensure the stop arm is extended.
18. Bus drivers:
are exempt from wearing a seat belt.
are required to wear a seat belt only when driving in construction zones.
must wear a seat belt at all times.
are required to wear a seat belt only when transporting passengers.
19. If ABS is not working:
you will not have any brakes.
you should use the parking brake.
you will still have brakes.
you should use the emergency brake.
20. When parked on the side of the road, you should:
activate the right turn signal.
turn off all lights.
use the 4-way emergency flashers.
flash your brake lights.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More