SCHOOL BUS PRACTICE TEST NEVADA

11. The overhead inside rearview mirror is used to:
allow congested traffic to disperse.
perform a safe stop at designated unloading areas.
monitor passenger activity inside the school bus.
monitor the blind spot area directly behind the driver’s seat.
12. At railroad crossings, you must stop no closer than ___ feet and no farther than ___ feet from the nearest rail.
50; 100
20; 40
25; 75
15; 50
13. Road surfaces where water collects can create conditions that cause a vehicle to hydroplane. Which of the following is an indication of standing water?
Raindrops on the road
Tire splashes
Clear reflections
All of the above.
14. As a general rule, during an emergency students should be kept:
off the bus, and at least 15 feet away from traffic.
on the side in an open area.
on the bus.
off the bus on the side of the road.
15. When driving on a slippery surface, you should do all of the following except:
adjust braking to conditions.
watch far enough ahead to keep a steady speed.
keep a shorter following distance.
not pass slower vehicles unless necessary.
16. When crossing railroad tracks, you should:
shift gears while crossing the tracks.
try to pass slower vehicles.
put the transmission in Neutral.
not stop.
17. A school bus driver must evacuate the bus when:
you have pull off the road and stop.
the bus is stalled on the shoulder of a 4-lane divided highway and it's snowing.
the ABS is not working properly.
the bus is stalled on a railroad crossing.
18. Which of the following statements about bus evacuation is true?
If time allows, you should notify your dispatch office of the evacuation conditions, location and type of assistance needed.
You should never remove the ignition key.
If time allows, you should close all windows before leaving the bus.
All of the above.
19. You should use the overhead inside rearview mirror to:
to monitor traffic and check clearances.
see the front bumper "danger zone" area in front of the bus.
to monitor the left and right sides of the bus at a wide angle.
see what is happening on the bus.
20. When loading or unloading passengers, put the transmission:
second gear.
in Neutral.
in first gear.
in reverse.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More