NY CDL SCHOOL BUS TEST - PRACTICE TEST

11. Crossover mirrors are used to:
monitor the left and right sides of the bus at a wide angle.
monitor traffic.
see the "danger zone" areas in front of the bus and to the left and right side of the bus.
monitor passenger activity inside the bus.
12. If the drive wheels begin to spin when accelerating, you should:
continue to accelerate.
brake gently.
take your foot off the accelerator.
set the parking brake.
13. When approaching an emergency vehicle stopped on the side of the road with lights flashing, you should:
yielding the right-of-way by coming to a complete stop.
speed up.
move to the lane not next to that of the emergency vehicle.
stay in the right lane.
14. When stopping you should push the brake pedal down:
quickly.
as hard as you can.
gradually.
repeatedly.
15. Passive railroad crossings:
do not have any type of traffic control device.
do not require you to stop.
do not have yellow circular advance warning signs, pavement markings and crossbucks.
All of the above.
16. Before crossing railroad tracks you should:
stop no closer than 100 feet from the nearest rail.
place the transmission in first gear.
open the service door and driver's window to look and listen for approaching trains.
stay to the left of the roadway if possible.
17. When a rider wants to board the bus with a car battery, you should:
not allow the car battery on the bus.
put the car battery in the aisle.
check that the battery does not contain any gasoline.
put the car battery at the back of the bus.
18. Select the best answer. Danger zones are located:
to the sides of the bus.
on all sides of the bus.
to the rear of the bus.
in the front of the bus.
19. You should adjust outside mirrors:
during a trip.
before a trip begins.
while students get on the bus.
while students get off the bus.
20. When evacuating the bus, a safe place will be at least _____ off the road in the direction of oncoming traffic.
100 feet
20 feet
50 feet
30 feet
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More