OH CDL SCHOOL BUS TEST - PRACTICE TEST

11. Skids caused by acceleration can usually be stopped by:
applying the brakes firmly.
swerving to the right.
taking your foot off the accelerator.
12. Students should board the bus:
two at a time.
in single file.
three at a time.
13. When stopping, you should bring the school bus to a full stop how many feet away from students at the bus stop?
At least 5 feet
At least 10 feet
At least 50 feet
14. Properly adjusted outside mirrors should allow school bus drivers to see _______ behind the bus.
2 bus lengths
3 bus lengths
4 bus lengths
15. Even if you are not required to always stop at railroad crossings and you are sure no train is approaching, you must stop before reaching the crossing if:
the tracks are not clear.
you can drive completely through the crossing without stopping.
there is oncoming traffic.
16. If you are loading students along the route and cannot account for a student, you should:
ask other students if they saw the missing students.
secure the bus, adjust the mirrors and prepare to leave.
secure the bus, take the key and check around and underneath the bus.
17. During an emergency student safety is generally best maintained by:
leading students downwind of the bus if fire is present.
leading students as far away from the bus as possible.
keeping students on the bus.
18. Before crossing railroad tracks you should:
open the service door and driver's window to look and listen for approaching trains.
place the transmission in first gear.
stop no closer than 100 feet from the nearest rail.
19. If your bus has a manual transmission:
never change gears while crossing railroad tracks.
cross the railroad tracks in a low gear.
All of the above.
20. Properly adjusted outside left and right side flat mirrors should allow the driver to see:
the front tires touching the ground.
the rear tires touching the ground.
at least 1 traffic lane on either side of the bus.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More