TX CDL COMBINATION TEST - PRACTICE TEST

11. Air brakes:
should be used only when driving on wet roads.
are prohibited on larger vehicles.
can improve fuel efficiency.
are an effective way to stop large and heavy vehicles.
12. The proper following distance for a 60-foot vehicle traveling at 50 mph is:
7 seconds
4 seconds
6 seconds
8 seconds
13. When parking, you should choose a spot:
that allows you do a walk around inspection.
that requires backing up.
that allows you to pull forward when you leave.
All of the above.
14. If you must make an emergency stop, you should:
apply the brakes as hard as you can to lock them.
brake in a way that will keep your vehicle in a straight line.
use the hand brake before the brake pedal.
None of the above.
15. During a walk around inspection of a combination vehicle, drivers should check that:
the locking jaws are around the shank.
all locking pins are present and locked in place.
the glide plate is securely mounted to the trailer frame.
All of the above.
16. Who is responsible for inspecting the cargo?
The driver
The motor carrier
The shipper
The person who loaded and secured the cargo
17. A bridge formula permits less maximum axle weight for axles that:
are further apart than normal
are closer together
have a high center of gravity
have poor weight balance
18. To know how much space you should keep in front of you when driving at speeds below 40 mph, one good rule says you need at least ______ for each ______ of vehicle length.
3 seconds; 50 feet
1 second; 5 feet
2 seconds; 10 feet
1 second; 10 feet
19. If you get stuck on railroad tracks, you should:
stay in the vehicle and call for help.
have a helper push your vehicle.
get out of the vehicle and away from the tracks.
check the engine compartment quickly.
20. If the spring brakes do not release when you push the trailer air supply control, you should:
pump the brakes.
check the electrical cables.
check the air line connections.
rev or lug the engine.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More