WA CDL COMBINATION TEST - PRACTICE TEST

11. To avoid rollovers, you should drive slowly:
around corners.
on ramps.
All of the above.
12. When should you use the hand valve to park a combination vehicle?
Never.
When parking downhill.
To park at loading docks.
13. The iron trailer supports are up, and the full weight of the trailer is resting on the tractor. Make sure:
you are in a low enough gear.
the safety latch is not engaged.
there is enough clearance between the rear of the tractor frame and the landing gear.
14. You are driving on a steep downgrade in the proper low gear. Your "safe" speed is 40 mph. When your speed reaches 40 mph, you should:
increase your speed to approximately 45 mph, and then apply release the brakes.
apply the brakes to gradually reduce your speed to 35 mph, and then release the brakes.
apply the brakes to quickly reduce your speed to 25 mph, and then release the brakes.
15. To unlock the fifth wheel, pull the release handle to the _______ position.
open
neutral
closed
16. Empty trucks have the best braking. True or False?
True.
False.
It depends on the cargo.
17. If you have convex mirrors, be aware that:
in a convex mirror objects appears larger than they really are.
objects seem closer than they really are.
everything appears smaller in a convex mirror than it would if you were looking at it directly.
18. Radial and bias-ply tires:
should be used together.
should not be used together.
should be used together only when driving in packed snow.
19. Strong winds can make it difficult to stay in your lane, especially when:
coming out of tunnels.
going into tunnels.
driving at speeds below 40 mph.
20. Having ABS on only the trailer:
still gives you more control over your vehicle during braking.
is very dangerous.
makes the trailer more likely to swing out.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More