COLORADO CDL SCHOOL BUS PRACTICE TEST

11. If a bus has a restroom:
the restroom emergency buzzer must be in safe working condition.
the restroom must have an emergency exit.
the restroom must have a window.
All of the above.
12. While crossing railroad tracks, you should:
shift up.
not shift gears.
stop, then look and listen for the train.
shift down.
13. Which of the following statements about the special dangers of loading and unloading is true?
Students should be told to leave any dropped object and move to a point of safety out of the danger zones and attempt to get the driver’s attention to retrieve the object.
Students should be told to pick up any dropped object as long as it's not under the bus.
You should move the bus prior to confirming that all students have exited the bus and are in a safe location.
None of the above.
14. You should always adjust your speed to be able to stop within:
30 feet.
the length of your vehicle.
the distance you can see ahead.
50 feet.
15. If the safety relief valve in the air brake system releases air:
something is wrong.
the valve is fully operational.
this will supply more power to the drive wheels.
this will supply more power to the brakes.
16. If a rider wants to board the bus with a car battery, the bus driver should:
not allow the rider to carry on the battery.
inspect the battery before allowing the rider to carry it on board.
call the police.
instruct the rider to sit next to the exit doors.
17. If the road is icy, you should:
put the transmission in neutral and stay off the brake until the vehicle has slowed down, then pull off the road and stop.
maintain your current speed and stop driving as soon as you can safely do so.
reduce speed to a crawl and stop driving as soon as you can safely do so.
All of the above.
18. When approaching a stopped school bus, drivers must be aware that:
the bus may suddenly start up and drive into your way.
students may start to get out of the bus.
passengers may cross in front of or behind the bus.
All of the above.
19. If your vehicle is hydroplaning, you should:
accelerate to get through the water as quickly as possible.
use the brakes to slow down.
release the accelerator and push in the clutch.
None of the above.
20. What factors can cause brakes to fail or fade?
Excessive use of the service brakes
Brakes out of adjustment
Not relying on the engine braking effect
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More