View instructions
Operating a motorcycle safely requires special skills and knowledge. To earn your motorcycle license in Kentucky, you must pass a knowledge test and an on-cycle skill test. Knowledge test questions are based on information from the Kentucky Motorcycle Operator Manual. The test consists of 30 questions, and you must score at least 24 to pass.
1.
While making normal turns, the rider and the motorcycle must:
|
not lean at all.
|
|
|
lean at different angles.
|
|
|
lean together at the same angle.
|
|
|
None of the above.
|
2.
Approach turns and curves with caution. Use these four steps for better control:
|
1. Roll 2. Slow 3. Look 4. Lean
|
|
|
1. Look 2. Slow 3. Roll 4. Lean
|
|
|
1. Lean 2. Look 3. Slow 4. Roll
|
|
|
1. Slow 2. Look 3. Lean 4. Roll
|
3.
Which surface provides little traction?
|
fallen leaves.
|
|
|
wet pavement.
|
|
|
gravel roads.
|
|
|
All of the above.
|
4.
Surfaces that provide poor traction include:
|
Mud
|
|
|
All the other answers are correct.
|
|
|
Snow
|
|
|
Gravel roads
|
5.
Braking distance is:
|
how far a vehicle will travel, in ideal conditions, while the driver is braking.
|
|
|
the total distance a vehicle has traveled until it comes to a complete stop.
|
|
|
usually 100 feet.
|
|
|
how far a vehicle will continue to travel before the driver hits the brakes.
|
6.
Head checks:
|
should be your normal routine.
|
|
|
are not required if you are riding a motorcycle.
|
|
|
should only be made for left turns.
|
|
|
are only required if you are riding at night.
|
7.
If you take curves
or turns too fast, you may end up:
|
crossing into another lane of
traffic.
|
|
|
twisting the throttle.
|
|
|
shifting gears.
|
|
|
tipping over.
|
8.
If your motorcycle starts to wobble, do NOT:
|
accelerate out of the wobble.
|
|
|
grip the handlebars firmly.
|
|
|
leave the road as soon as you
can.
|
|
|
roll off the throttle.
|
9.
In _______ turns, the rider and the motorcycle should lean together at the same angle.
|
fast tight
|
|
|
slow tight
|
|
|
normal
|
|
|
U-
|
10.
When you carry loads, you should:
|
fasten the load
securely.
|
|
|
stop and check
the load every so often.
|
|
|
All the other answers are correct.
|
|
|
distribute the load evenly.
|
Page 1 of 3
Next page
Grade this page