RI CDL SCHOOL BUS TEST - PRACTICE TEST

11. When approaching a school bus stop, you should:
continuously check all mirrors.
activate amber warning lights.
All of the above.
12. When unloading students at the school, you should:
leave the driver's compartment and keeping the key in the ignition.
secure the bus by turning off the ignition switch.
have the students stand until told to exit.
13. Before driving your bus, make sure ________ do not have recapped or regrooved tires.
the spare wheels
the front wheels
the rear wheels
14. How can you tell if your vehicle is equipped with ABS?
Look for yellow ABS malfunction lamps on the instrument panel.
Trailers will have yellow ABS malfunction lamps on the left side.
All of the above.
15. Rough acceleration:
is necessary to warm up the engine.
can cause mechanical damage.
improves gas mileage.
16. Road surfaces where water collects can create conditions that cause a vehicle to hydroplane. Which of the following is an indication of standing water?
Tire splashes
Clear reflections
All of the above.
17. If a tire fails while you are driving, you should:
stop on the roadway if possible.
call your supervisor for instructions.
stay off the brake until your vehicle has slowed down.
18. When driving at night, to avoid glare from oncoming vehicles you should:
look slightly to the right at a right lane or edge marking.
put your own high beams on when other drivers do not put their low beams on.
look directly at lights of oncoming vehicles.
19. During an emergency student safety is generally best maintained by:
leading students downwind of the bus if fire is present.
keeping students on the bus.
leading students as far away from the bus as possible.
20. When stopping you should push the brake pedal down:
quickly.
repeatedly.
gradually.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More