SCHOOL BUS CDL TEST TN - PRACTICE TEST

11. Of all the space around your vehicle, the most important is:
the area to the sides of the vehicle.
All areas around the vehicle are equally important.
the area behind the vehicle.
the area ahead of the vehicle.
12. If the drive wheels begin to spin, you should:
accelerate smoothly and change gears as necessary.
take your foot off the accelerator.
apply your brakes all the way.
wait 4-5 seconds before applying the accelerator.
13. Emergency brakes must be held on by:
dynamic pressure.
mechanical force.
hydraulic pressure.
air pressure.
14. Before crossing railroad tracks you should:
stop no closer than 100 feet from the nearest rail.
stay to the left of the roadway if possible.
open the service door and driver's window to look and listen for approaching trains.
place the transmission in first gear.
15. Properly adjusted outside mirrors should allow school bus drivers to see _______ behind the bus.
2 bus lengths
1 bus length
4 bus lengths
3 bus lengths
16. The ABS malfunction lamp on the instrument panel is:
Red
Yellow
Blue
Orange
17. When loading or unloading passengers, put the transmission:
in first gear.
in reverse.
in Neutral.
second gear.
18. What factors can cause brakes to fail or fade?
Excessive use of the service brakes
Not relying on the engine braking effect
Brakes out of adjustment
All of the above.
19. If you hear a loud loud "bang" and the steering feels "heavy", you should:
hold the steering wheel firmly and stay off the brake.
pump the brakes until the vehicle has slowed down.
check your rearview mirrors to see if you have a flat tire.
brake hard and pull off the road.
20. ABS (Anti-lock Braking System):
is an addition to your normal brakes.
keeps your wheels from locking when you apply the brakes hard.
does not decrease or increase your normal braking capability.
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More