SCHOOL BUS CDL TEST WY - PRACTICE TEST

11. When unloading students, tell them to exit the bus and walk at least ___ feet away from the side of the bus.
5
10
8
15
12. Skids caused by acceleration can usually be stopped by:
swerving to the right.
swerving to the left.
applying the brakes firmly.
taking your foot off the accelerator.
13. When driving on slippery surfaces, a lack of spray from other vehicles indicates that:
the road hasn't started to ice up yet.
ice has formed on the road.
the pavement is dry.
there is no ice on the road surface.
14. If your vehicle has power steering, during your pre-trip external inspection you must check that:
there are 2 lit red lights indicating it's there.
the engine rpm is down close to idle.
there's a function light.
there are no power steering fluid leaks or damage to the power steering hoses.
15. When driving in heavy traffic, the safest speed is:
slightly higher than the speed of other traffic.
the posted speed limit.
the speed of traffic.
slower than the speed of other traffic.
16. When backing, you should:
use the mirrors on both sides.
only use mirror on the driver's side.
back and turn toward the right side whenever possible.
back quickly.
17. To ensure rider safety, bus drivers should always check the interior of the bus before driving. Aisles and stairwells should always be:
placarded.
reserved for seniors.
clean.
clear.
18. Baggage and freight should be secured in a way that:
allows riders to quickly take their baggage with them in an emergency.
allows riders to exit by any window or door in an emergency.
allows riders to easily identify their baggage before they get off the bus in an emergency.
blocks one exit, but allows riders to exit by any remaining window or door in an emergency.
19. When driving on a slippery surface, you should do all of the following except:
watch far enough ahead to keep a steady speed.
adjust braking to conditions.
keep a shorter following distance.
not pass slower vehicles unless necessary.
20. The safety valve is usually set to open at:
100 psi.
150 psi.
75 psi.
200 psi.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More