WYOMING CDL SCHOOL BUS PRACTICE TEST
11.
What should you do if you miss a student's unloading stop?
|
Back up whenever possible.
|
|
|
Turn on the right turn signal and try to stop to unload the student.
|
|
|
Do not back up, and follow the local procedure.
|
|
|
None of the above.
|
12.
If the drive wheels begin to spin, you should:
|
accelerate smoothly and change gears as necessary.
|
|
|
apply your brakes all the way.
|
|
|
wait 4-5 seconds before applying the accelerator.
|
|
|
take your foot off the accelerator.
|
13.
Rough acceleration:
|
is necessary to warm up the engine.
|
|
|
improves gas mileage.
|
|
|
can cause mechanical damage.
|
|
|
is recommended during long trips.
|
14.
To recognize distracted drivers, you should watch for all of the following except:
|
Drivers talking on the phone.
|
|
|
Vehicles traveling at inconsistent speeds.
|
|
|
Drivers who are involved in conversations with their passengers.
|
|
|
Students sitting on a bench waiting for a bus.
|
15.
The overhead inside rearview mirror is used to:
|
perform a safe stop at designated unloading areas.
|
|
|
allow congested traffic to disperse.
|
|
|
monitor the blind spot area directly behind the driver’s seat.
|
|
|
monitor passenger activity inside the school bus.
|
16.
Riders getting on or off the bus:
|
should not be supervised.
|
|
|
can stumble and should be supervised.
|
|
|
are likely to be disruptive.
|
|
|
should should stand near the back of your vehicle.
|
17.
If ABS is not working:
|
you will not have any brakes.
|
|
|
you will still have brakes.
|
|
|
you should use the parking brake.
|
|
|
you should use the emergency brake.
|
18.
When unloading students at the school, you should:
|
have the students stand until told to exit.
|
|
|
close the door and release the parking brake.
|
|
|
leave the driver's compartment and keeping the key in the ignition.
|
|
|
secure the bus by turning off the ignition switch.
|
19.
What should you do if your vehicle starts hydroplaning?
|
Leave the road completely.
|
|
|
Apply the brakes and countersteer to regain control of the vehicle.
|
|
|
Release the accelerator and push in the clutch to let the wheels turn freely.
|
|
|
Accelerate slightly, then push in the clutch to slow down.
|
20.
Right after it starts to rain, the road is very slippery. Why?
|
Because rain is very slippery.
|
|
|
Because black ice may form on the road.
|
|
|
Because the water mixes with oil left on the road by vehicles.
|
|
|
None of the above.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More