CDL VEHICLE INSPECTION TEST ALASKA
11.
During the vehicle inspection test, you may be asked to:
|
replace the electrical and brake lines.
|
|
|
check the engine oil level.
|
|
|
change the coolant.
|
12.
Wheel and rim problems include:
|
missing clamps.
|
|
|
mismatched lock rings.
|
|
|
All of the above.
|
13.
When inspecting brakes, you should look for:
|
cracked drums.
|
|
|
shoes worn dangerously thin.
|
|
|
All of the above.
|
14.
Which of the following engages and disengages the engine from the drive train?
|
The drive shaft
|
|
|
The clutch
|
|
|
The front axle
|
15.
Which of the following is NOT a tire problem to look for during the vehicle inspection?
|
All the tires are made by the same manufacturer
|
|
|
Recapped tires on the front of a school bus
|
|
|
Radial and bias-ply tires used together
|
16.
In a vehicle inspection, all lug nuts should:
|
be free of distortions.
|
|
|
be free of cracks.
|
|
|
All of the above.
|
17.
The most important reason for doing a vehicle inspection is:
|
Employer liability
|
|
|
Liability insurance
|
|
|
Safety
|
18.
During the vehicle inspection, when approaching the vehicle you should:
|
check that the parking brakes are not set.
|
|
|
look under the vehicle for fresh oil, fuel leaks or coolant.
|
|
|
check that the vehicle is clear.
|
19.
During the pre-trip inspection test, you will be expected to:
|
watch the examiner inspect the bus for safety.
|
|
|
show that you can identify the bus operating systems, and that you know how to inspect them for safety.
|
|
|
pass three basic control tests.
|
20.
Wheel bearing seals should be checked for:
|
twisted axles.
|
|
|
leaks.
|
|
|
dirt.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More