CDL VEHICLE INSPECTION TEST OKLAHOMA

To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Oklahoma CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.

1. As part of the external inspection, check that all _______ are present, free of cracks and distortions, and show no signs of looseness.

lug nuts
axle seals
spacers

2. When inspecting your vehicle for suspension system defects, look for:

leaking shock absorbers.
cracked or broken spring hangers.
All of the above.

3. _______ are one of the most common problems found in roadside inspections.

Out-of-adjustment brakes
Brake drums
Slack adjusters

4. Pre-trip inspections of doubles and triples should:

take more time than inspecting straight trucks.
be done by the shipper.
take less time than inspecting straight trucks.

you should replace the battery.
you should place the vehicle out of service.
you should inspect the vehicle.

6. During the pre-trip inspection, check that the ________ supply air or hydraulic fluid to the brakes.

slack adjusters
brake hoses or lines
brake linings

7. Which of the following is NOT a tire problem to look for during the vehicle inspection?

Radial and bias-ply tires used together
All the tires are made by the same manufacturer
Recapped tires on the front of a school bus

8. Name some key suspension system parts.

Pitman arm, hydraulic fluid reservoir and tie rod
Drag link, spindle and gear box
Main spring, axle and font axle hanger

9. When approaching a vehicle as part of a pre-trip inspection, the driver should look under the vehicle for all of the following except:

Grease
Coolant
Windshield wiper fluid

10. During the external inspection, you should check that the _______ (if equipped) are evenly centered, with the dual wheels and tires evenly separated, and are not bent, damaged, or rusted through.

spacers
axle seals
All of the above.

Rate This Free Test

4.7 out of 5
based on 152 votes

Number of questions:	20
Correct answers to pass:	16
Passing score:	80%

Number of questions:	20
Correct answers to pass:	16
Passing score:	80%

CDL VEHICLE INSPECTION TEST OKLAHOMA

OK CDL Inspection Test