VEHICLE INSPECTION CDL TEST ALASKA

11. During the pre-trip inspection, when starting the engine you should:
check the coolant level in the radiator.
fasten your safety belt.
listen for unusual noises.
12. Which gauge show that the alternator and/or generator is charging?
Engine oil temperature
Ammeter/voltmeter
All of the above
13. When looking at the gauges during a pre-trip vehicle inspection:
you should immediately turn on the stop lights.
oil pressuse should come up to normal within seconds after the engine is started.
you should pump the brake pedal three times to test the parking brake.
14. You should check that the _____ is solid, clear of objects, and securely bolted to the tractor frame.
catwalk
sliding pintle
apron
15. What should you do to test your vehicle's low air pressure warning signal?
With the key in the "on" or "battery charge" position, rapidly apply and release the foot brake.
With the engine running, put the vehicle in a forward gear and attempt to drive forward.
Pump the brakes until the air pressure drops below 80 psi.
16. Which of the following is not a braking system on a truck?
Service brake
Steering brake
Parking brake
17. When performing the stop/start maneuver during the skills test, once stopped you should do all of the following, except:
Cancel your turn signal.
Activate your 4-way emergency flashers.
Activate your right turn signal.
18. As part of the external inspection, check that all _______ are present, free of cracks and distortions, and show no signs of looseness.
axle seals
spacers
lug nuts
19. When approaching a vehicle as part of a pre-trip inspection, which of the following could be a sign of trouble?
Inflated tires
Fresh oil under the vehicle
Parking brake is on
20. During the pre-trip vehicle inspection test, when examining hoses with the examiner, look for:
the temperature gauge.
frays in the water pump belt.
puddles on the ground.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More