COMBINATION TEST ARKANSAS - PRACTICE TEST

View instructions
Drivers who want to drive combination vehicles must pass the combination vehicles test. The Arkansas CDL combination test consists of 20 questions, and you'll need at least 16 correct answers to pass (80%). The test covers the combination vehicles section of the Arkansas CDL Manual. Take this practice test now to prepare for the actual AR CDL combination test!
1. When checking the air and electric lines to the trailer, be sure that the air lines are properly connected to the gland hands, and are:
properly greased.
secured with enough air leaks for turns.
secured with enough slack for turns.
None of the above.
2. What is the proper following distance for a 40 foot truck traveling at 35 mph?
12 seconds
5 seconds
10 seconds
4 seconds
3. When using a fire extinguisher, you should stay:
as close to the fire as possible, without getting burnt.
at whatever distance you think is safe.
as far away from the fire as possible.
at least 10 feet away from the fire.
4. You have two tie-downs on a 15 foot load. How many more tie-downs do you need to secure cargo and keep it from shifting or falling?
Three
None
One
Two
5. The service line is also called:
control line or signal line.
signal line or air line.
pressure line or signal line.
carrier line or control line.
6. On a tractor-trailer equipped with a trailer brake hand valve, the hand valve can be used to:
hold compressed air.
keep from rolling back.
reduce the chance of the front wheels skidding.
prevent movement of cargo.
7. When a vehicle goes around a corner, the rear wheels:
will lock up.
follow the same path as the front wheels.
will turn freely.
follow a different path than the front wheels.
8. If a load is 10 feet long, the minimum number of tie-downs required is:
2
1
3
4
9. Which of the following is most likely to roll over?
The rear trailer of a double
The middle trailer of a triple
The front trailer of a double
The rear trailer of a triple
10. During your inspection, you should look into the fifth-wheel gap and check that the _________ are fully closed around the kingpin.
couplings (U-joints)
mounting bolts
lug nuts
locking jaws
 
Page 1 of 2
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More

AR CDL Combination Test

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test
Rate this CDL Combination Test
4.7 out of 5
based on 153 votes