CDL VEHICLE INSPECTION TEST CALIFORNIA

11. During the basic control skills test you may be asked to perform any of the following, except:
Trailer jackknife
Straight line backing
Offset back/right
12. During the pre-trip inspection, belts should:
not be inspected.
checked for oil pressure.
be checked for tightness and excessive wear.
13. During the road test, you will be expected to do all of the following EXCEPT:
temporarily exceed the posted speed limit when passing other vehicles.
make regular traffic checks.
wear your safety belt.
14. During a pre-trip inspection, to check your lights you should:
check the yellow malfunction lamps on the instrument panel.
turn off the engine, turn on the headlights and 4-way emergency flashers, and get out of the vehicle.
with the engine running, put the vehicle in a forward gear and turn on the headlights.
15. Brake drums (or discs) must not have cracks longer than:
the width of the friction area.
one half the width of the friction area.
twice the width of the friction area.
16. During the vehicle inspection test, CDL applicants may be asked to:
replace the emergency flashers.
change a tire.
None of the above.
17. During the driving test, the examiner will be scoring you on:
your general attitude.
general driving behavior.
how fast you drive.
18. Suspension system defects include:
rust around wheel nuts.
steering wheel play of more than 10 degrees.
cracked or broken spring hangers.
19. If the coolant container is not part of the pressurized system:
you can safely remove the cap and add coolant even when the engine is hot.
you should never remove the radiator cap or any part of the pressurized system until the system has cooled.
you should remove the container cap and wait until the system has cooled.
20. How can you check slack adjusters?
Turn the electrical power on and step on and off the brake pedal.
Check that the spring brakes come on automatically.
Use gloves and pull hard on each slack adjuster that you can reach.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More