Vehicle Inspection CDL Test California

11. Which of the following is NOT checked in a pre-trip inspection?
Safety equipment
The amount of fuel in the vehicle
Cargo securement
12. If you are checking that the air hoses and electrical lines are not spliced, cut, chafed or worn, you are inspecting:
the exhaust system.
the air / electric lines.
the mounting bolts.
13. When making a lane change during the skills test, you should:
come to a complete stop first.
avoid using your mirrors.
make the necessary traffic checks first.
14. During the vehicle inspection, you will be expected to do all of the following except:
touch and name the item you are inspecting and explain why.
change a tire.
show that the vehicle is safe to drive.
15. When taking the road test, if asked to make a turn you should:
use turn signals.
check for traffic in all directions.
All of the above.
16. When taking the road test, you will be expected to make regular traffic checks. You should do all of the following except:
checking mirrors regularly.
checking engine oil level.
checking for traffic regularly.
17. When checking the steering system for defects, you should look for:
missing or broken leaves in any leaf spring.
cut or cracked valve stems.
bent, loose, or broken parts, such as tie rods.
18. When taking the road test, after driving under an overpass, you may be asked:
what the weight limit was.
what the posted clearance or height was.
how wide the overpass was.
19. What is a pull up when referring to truck driving?
A specific maneuver used to decelerate smoothly in the exit lane.
When a driver stops and pulls forward to get a better position.
A driving maneuver used to pull your vehicle over to the side of the road and stop.
20. When checking the condition of the visible parts during your pre-trip inspection, make sure that the _________ are secured against rubbing, snagging or wearing.
tailboards
air lines and electrical wiring
reflectors
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More