CDL VEHICLE INSPECTION TEST IDAHO

11. Which of the following is true about the skills test?
You must take the skills tests in the type of vehicle for which you wish to be licensed.
You don't have to take the skills tests in the type of vehicle for which you wish to be licensed.
You must take the skills tests in a vehicle that has components marked or labeled.
12. When performing the stop/start maneuver during the skills test, you should:
activate your left turn signal.
decelerate smoothly.
apply the brakes as hard as you can without locking the wheels.
13. What should you do to test your hydraulic brakes for leaks?
Pump the brake pedal three times, then apply pressure to the pedal and hold for five seconds.
Pump the brake pedal five times, then apply pressure for three seconds.
Hold the brake pedal down for five seconds, then pump it three times.
14. Exhaust system parts should NOT:
rub against tires.
rub against fuel system parts.
All of the above.
15. During the external inspection, you should check that the _______ (if equipped) are evenly centered, with the dual wheels and tires evenly separated, and are not bent, damaged, or rusted through.
axle seals
spacers
All of the above.
16. Which of the following is checked in a pre-trip inspection?
Wiper blades
Steering wheel
All of the above.
17. When taking the road test, you must do all of the following except:
Obey all traffic signs
Wear your safety belt
Tell the examiner where you'd like to drive
18. ______ must have a minimum tread depth of 4/32 of an inch.
Steering axle tires
All tires other than front tires
All of the above.
19. When checking the lights before driving:
you should turn off the engine.
you should check them from inside the vehicle.
make sure the parking brake is not set.
20. When approaching a vehicle as part of a pre-trip inspection, which of the following could be a sign of trouble?
Inflated tires
Fresh oil under the vehicle
Parking brake is on
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More