» Idaho Vehicle Inspection 2 » Page 2 of 2

VEHICLE INSPECTION CDL TEST IDAHO

11. During the vehicle inspection, when checking the tires you should:
ensure that valve caps are missing.
check for the minimum tread depth (4/32 on all tires).
ensure that the tread is evenly worn.
12. To check the automatic transmission fluid:
you must go down grades.
the engine may have to be running.
the wheel nuts must be loose.
13. __________ are devices designed to absorb and damp jolts and vibrations.
Brakes
Shock absorbers
Springs
14. Doing a vehicle inspection is very important. Why?
A defect found during an inspection could save you problems later.
Federal and state regulations require that drivers inspect their vehicle.
All of the above.
15. When checking the condition of the steering system, you must:
Visually inspect the steering mechanism.
Check the windshield wiper arms.
grab the steering mechanism to test for looseness.
16. Which of these is NOT something you should check during the pre-trip inspection of the engine compartment?
Engine oil level
Coolant level in radiator
Brake controls
17. In the steering box part of the vehicle inspection test, you should:
look for any missing nuts or bolts.
check that the steering box is securely mounted.
All of the above.
18. When checking your tires during a pre-trip inspection, which of the following is acceptable?
Tires made by different manufacturers
Dual tires that come in contact with parts of the vehicle
Cracks in the tires
19. When taking the road test, if asked to make a turn you should:
use turn signals.
check for traffic in all directions.
All of the above.
20. When taking the road test, you will be evaluated on your use of turn signals. You should do all of the following except:
Activate your turn signals upon completion of a turn or lane change.
Use your turn signals properly.
Activate your turn signals when required.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More