CDL VEHICLE INSPECTION TEST ILLINOIS

11. What should be fully engaged with no loose or missing pins in the slide mechanism of the sliding fifth-wheel?
Hitch release lever
Locking jaws
Sliding pintle
Locking pins
12. During the pre-trip inspection, when starting the engine you should:
listen for unusual noises.
press the brake pedal.
fasten your safety belt.
check the coolant level in the radiator.
13. During the driving test, the examiner will be scoring you on:
general driving behavior.
your general attitude.
how fast you drive.
how many times you turn.
14. During the vehicle inspection test, CDL applicants may be asked to:
replace a reflective triangle.
change a tire.
replace the emergency flashers.
None of the above.
15. What should you do to test your hydraulic brakes for leaks?
Pump the brake pedal three times, then apply pressure for 9 seconds.
Pump the brake pedal three times, then apply pressure to the pedal and hold for five seconds.
Pump the brake pedal five times, then apply pressure for three seconds.
Hold the brake pedal down for five seconds, then pump it three times.
16. During the vehicle inspection, make sure that the _____ is in the engaged position and that the safety latch is in place.
apron
drawbar
release arm
locking jaw
17. When conducting the vehicle inspection test:
the air ride suspension should not be checked for leaks.
you may have to check that the minimum tread depth is 2/32 on steering axle tires.
applicants will not have to see that the brake chambers are not leaking.
you may be asked to check that the steering box is not leaking.
18. Pre-trip inspections of doubles and triples should:
take less time than inspecting straight trucks.
be done by the shipper.
be done once a week.
take more time than inspecting straight trucks.
19. When performing the stop/start maneuver during the skills test, once stopped you should do all of the following, except:
Activate your 4-way emergency flashers.
Activate your right turn signal.
Apply the parking brake.
Cancel your turn signal.
20. During the external inspection, check that all lug nuts:
are present.
show no signs of looseness.
are free of cracks.
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More