Casey County Public Library

View instructions
To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Kentucky CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.
1. When taking the road test, you will be evaluated on your use of turn signals. You should do all of the following except:
Use your turn signals properly.
Activate your turn signals upon completion of a turn or lane change.
Activate your turn signals at appropriate times.
Activate your turn signals when required.
2. During the vehicle inspection test, when asked to check the power steering fluid you should:
indicate where power steering fluid dipstick is located.
ensure that the power steering fluid level is above the refill mark.
check for adequate power steering fluid level.
All of the above.
3. When checking the lights before driving:
you should check them from inside the vehicle.
make sure the parking brake is not set.
you should turn off the engine.
the engine must be running.
4. Without engine oil:
the ABS won't work.
traction will be reduced.
exhaust emissions will be reduced.
the engine can be destroyed rapidly.
5. What should be clean with no obstructions, illegal stickers, or damages to the glass?
The headlights.
The windshield.
The lighting indicators.
None of the above.
6. All CDL vehicle inspection tests include:
an engine start and an inspection of the entire vehicle.
an in-cab inspection and background check.
an engine inspection and tire check.
an engine start and in-cab inspection.
7. During the pre-trip vehicle inspection test, when examining hoses with the examiner, look for:
frays in the water pump belt.
puddles on the ground.
the temperature gauge.
spare electrical fuses.
8. A vehicle inspection should be done:
the same way each time so you are less likely to forget something.
once every month.
differently each time, so you are less likely to forget something.
by a helper whenever possible.
9. Name some exhaust system parts.
Pitman arm, hydraulic fluid reservoir and tie rod
Drag link, spindle and gear box
Mufflers, mounting brackets and vertical stacks
Main spring, axle and font axle hanger
10. __________ are devices designed to absorb and damp jolts and vibrations.
Brakes
Springs
Shock absorbers
Valves
 
Page 1 of 2
Next page

Inspection Test - KY CDL

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test
Rate this Inspection Test -CDL
5 out of 5
based on 134 votes