» Maine Vehicle Inspection 1 » Page 2 of 2

CDL VEHICLE INSPECTION TEST MAINE

11. Which of the following is NOT true? During the vehicle inspection test, when starting the engine you should show that:
the oil pressure gauge is working.
the oil pressure gauge comes on when braking.
the temperature gauge is working.
12. When conducting the vehicle inspection test:
the air ride suspension should not be checked for leaks.
you may be asked to check that the steering box is not leaking.
applicants will not have to see that the brake chambers are not leaking.
13. You should check that the _____ is solid, clear of objects, and securely bolted to the tractor frame.
sliding pintle
catwalk
apron
14. In the steering box part of the vehicle inspection test, you should:
check that the steering box is securely mounted.
look for any missing nuts or bolts.
All of the above.
15. When performing the stop/start maneuver during the skills test, you should:
activate your left turn signal.
apply the brakes as hard as you can without locking the wheels.
decelerate smoothly.
16. When you inspect the front of your vehicle as part of the walk around inspection, you check all of the following EXCEPT:
the air pressure gauge.
the condition of your front axle.
the condition of the steering system.
17. When inspecting your vehicle for suspension system defects, look for:
cracked or broken spring hangers.
leaking shock absorbers.
All of the above.
18. If you find anything unsafe during the pre-trip inspection, you are required to:
drive cautiously until it is fixed.
get it fixed before driving.
write it in your inspection report.
19. During the vehicle inspection test, when asked to check the power steering fluid you should:
indicate where power steering fluid dipstick is located.
check for adequate power steering fluid level.
All of the above.
20. Which of the following is NOT a key part of the steering system?
Gear box
Pitman arm
Leaf spring
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More