MD CDL VEHICLE INSPECTION TEST
11.
During the vehicle inspection test, as you approach the vehicle you should (among other things):
|
check the area around the vehicle for low hanging wires.
|
|
|
check to see if the vehicle is leaning to one side.
|
|
|
look under the vehicle for fuel leaks.
|
|
|
All of the above.
|
12.
During the skills test, if you must stop before making the turn, you should:
|
keep the front wheel aimed straight ahead.
|
|
|
make sure the turn signal is off.
|
|
|
come to a complete stop after the line to get a better view.
|
|
|
let your vehicle roll.
|
13.
Which of the following are key steering system parts?
|
Torque rod, leaf spring, spring shackle
|
|
|
Tie rod, drag link, and gear box
|
|
|
U-Bolts, anchor plate and bellows
|
|
|
Main spring, axle and font axle hanger
|
14.
How can you check slack adjusters?
|
Wait for normal air pressure, release the parking brake, move the vehicle forward, and apply the brakes firmly using the brake pedal.
|
|
|
Check that the spring brakes come on automatically.
|
|
|
Use gloves and pull hard on each slack adjuster that you can reach.
|
|
|
Turn the electrical power on and step on and off the brake pedal.
|
15.
During the vehicle inspection, when asked to check the oil level you should:
|
see that the oil level is within safe operating range.
|
|
|
indicate where the dipstick is located.
|
|
|
make sure the engine is off.
|
|
|
All of the above.
|
16.
Which of the following are key steering system parts?
|
Leaf spring, torque rod, front axle hanger
|
|
|
Lug nuts, rims, tire
|
|
|
Tie rod, drag link, spindle
|
|
|
Axle, main spring, spring shackle
|
17.
When checking the engine compartment in a vehicle inspection, you should check all of the following except:
|
Spring hangers
|
|
|
Windshield washer fluid level
|
|
|
Coolant level in radiator
|
|
|
Engine oil level
|
18.
You are checking the tractor-trailer connection to make sure it is safe and secure. The landing gear should be:
|
fully raised.
|
|
|
fully lowered.
|
|
|
raised slightly off the ground.
|
|
|
None of the above.
|
19.
Wheel and rim problems include:
|
missing clamps.
|
|
|
mismatched lock rings.
|
|
|
rust around wheel nuts.
|
|
|
All of the above.
|
20.
To check the signal lights, do the following:
|
Turn on the stop lights, turn on all the lights, and turn on the right turn signal lights.
|
|
|
Turn off all the lights, turn on the right turn signal lights, and turn on the stop lights.
|
|
|
Turn on all the lights, turn off the stop lights, and turn off the left turn signal lights.
|
|
|
Turn off all the lights, turn on the stop lights, and turn on the left turn signal lights.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More