MI CDL Inspection Test (2024) - FREE CDL Practice Test

1. During the vehicle inspection test, when asked to check the power steering fluid you should:

check for adequate power steering fluid level.
indicate where power steering fluid dipstick is located.
All of the above.

2. You should check that the _____ is solid, clear of objects, and securely bolted to the tractor frame.

3. Which of the following is NOT checked in a pre-trip inspection?

The amount of fuel in the vehicle
Cargo securement
Safety equipment

4. When taking the road test, if asked to make a turn you should:

only use the turn signal if other vehicles are present.
gradually increase your speed.
check traffic in all directions.

5. When approaching a vehicle for a pre-trip inspection, you should:

look under the vehicle for fuel leaks, fresh oil, coolant or grease.
make sure the parking brake is on.
look under the vehicle for hazards to vehicle movement.

6. If you find anything unsafe during the pre-trip inspection, you are required to:

get it fixed before driving.
write it in your inspection report.
drive cautiously until it is fixed.

7. Brake drums (or discs) must not have cracks longer than:

the width of the friction area.
one half the width of the friction area.
twice the width of the friction area.

8. All CDL vehicle inspection tests include:

an engine start and in-cab inspection.
an engine start and an inspection of the entire vehicle.
an engine inspection and tire check.

9. During the vehicle inspection, you will be expected to do all of the following except:

show that the vehicle is safe to drive.
touch and name the item you are inspecting and explain why.
change a tire.

10. If you are checking that the air hoses and electrical lines are not spliced, cut, chafed or worn, you are inspecting:

VEHICLE INSPECTION CDL TEST MICHIGAN