VEHICLE INSPECTION CDL TEST MISSISSIPPI

11. During the external inspection, check that all lug nuts:
show no signs of looseness.
are present.
are free of cracks.
All of the above.
12. In the steering box part of the vehicle inspection test, you should:
look for any missing nuts or bolts.
check that the steering box is securely mounted.
check that the steering box is not leaking.
All of the above.
13. _______ are one of the most common problems found in roadside inspections.
Out-of-adjustment brakes
Slack adjusters
Air hoses connected to the brake chambers
Brake drums
14. When looking at the gauges during a pre-trip vehicle inspection:
oil pressuse should come up to normal within seconds after the engine is started.
you should pump the brake pedal three times to test the parking brake.
you should immediately turn on the stop lights.
None of the above.
15. Exhaust system parts should be:
leaking.
rubbing against fuel system parts.
loose.
None of the above.
16. During the vehicle inspection, when checking the tires you should:
ensure that valve caps are missing.
ensure the middle of the tires is more worn than the outside.
check for the minimum tread depth (4/32 on all tires).
ensure that the tread is evenly worn.
17. Check that the ____ belt is securely mounted, and adjusts, latches properly.
air compressor
steering
engine
safety
18. Wheel bearing seals should be checked for:
leaks.
twisted axles.
dirt.
tears.
19. During the basic control skills test you may be asked to perform any of the following, except:
Straight line backing
Parallel park
Trailer jackknife
Offset back/right
20. During the skills test, if you must stop before making the turn, you should:
let your vehicle roll.
come to a complete stop after the line to get a better view.
make sure the turn signal is off.
keep the front wheel aimed straight ahead.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More