MO CDL VEHICLE INSPECTION TEST

11. If you find anything unsafe during the pre-trip inspection, you are required to:
write it in your inspection report.
get it fixed before driving.
drive cautiously until it is fixed.
12. When checking the condition of the visible parts during your pre-trip inspection, make sure that the _________ are secured against rubbing, snagging or wearing.
tailboards
air lines and electrical wiring
reflectors
13. When performing the stop/start maneuver during the skills test, you should:
decelerate smoothly.
apply the brakes as hard as you can without locking the wheels.
activate your left turn signal.
14. When checking the engine compartment:
the parking brake should be on.
wheels should not be chocked.
you should put the gearshift in neutral.
15. During the vehicle inspection, you will be expected to do all of the following except:
touch and name the item you are inspecting and explain why.
show that the vehicle is safe to drive.
change a tire.
16. _______ are one of the most common problems found in roadside inspections.
Out-of-adjustment brakes
Brake drums
Slack adjusters
17. During the basic control skills test you may be asked to perform any of the following, except:
Straight line backing
Trailer jackknife
Offset back/right
18. When approaching a vehicle as part of a pre-trip inspection, the driver should look under the vehicle for all of the following except:
Windshield wiper fluid
Grease
Coolant
19. During the external inspection, check that all lug nuts:
show no signs of looseness.
are present.
All of the above.
20. When approaching a vehicle for a pre-trip inspection, you should:
look under the vehicle for fuel leaks, fresh oil, coolant or grease.
look under the vehicle for hazards to vehicle movement.
make sure the parking brake is on.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More