CDL VEHICLE INSPECTION TEST NEBRASKA

11. To check the signal lights, do the following:
Turn on the stop lights, turn on all the lights, and turn on the right turn signal lights.
Turn on all the lights, turn off the stop lights, and turn off the left turn signal lights.
Turn off all the lights, turn on the stop lights, and turn on the left turn signal lights.
Turn off all the lights, turn on the right turn signal lights, and turn on the stop lights.
12. Name some things you should check on the FRONT of your vehicle during your pre-trip inspection.
Oil, transmission, air compressor, and radiator
Low beams, high beams, four-way flashers, and turn signals
U-Bolts, anchor plate and bellows
None of the above.
13. When approaching a vehicle for a pre-trip inspection, you should:
look under the vehicle for fuel leaks, fresh oil, coolant or grease.
look under the vehicle for hazards to vehicle movement.
start the engine and listen for unusual noises.
make sure the parking brake is on.
14. What should you do to test your hydraulic brakes for leaks?
Pump the brake pedal five times, then apply pressure for three seconds.
Hold the brake pedal down for five seconds, then pump it three times.
Pump the brake pedal three times, then apply pressure to the pedal and hold for five seconds.
Pump the brake pedal three times, then apply pressure for 9 seconds.
15. Brake drums (or discs) must not have cracks longer than:
twice the width of the friction area.
the width of the friction area.
one third the width of the friction area.
one half the width of the friction area.
16. As part of your pre-trip inspection, make sure:
your cargo does not obscure your view.
the vehicle is not overloaded.
the cargo is balanced properly.
All of the above.
17. During the basic control skills test you may be asked to perform any of the following, except:
Straight line backing
Offset back/right
Parallel park
Trailer jackknife
18. When taking the skills test:
stopping without changing direction counts as a pull-up.
an excessive number of pull-ups will count as errors.
you will be penalized for initial pull-ups.
None of the above.
19. When approaching a vehicle as part of a pre-trip inspection, the driver should look under the vehicle for all of the following except:
Grease
Fresh oil
Windshield wiper fluid
Coolant
20. __________ are devices designed to absorb and damp jolts and vibrations.
Brakes
Springs
Valves
Shock absorbers
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More