VEHICLE INSPECTION CDL TEST NORTH DAKOTA
11.
During a walk around inspection, which of the following should you check?
|
Condition of the front axle.
|
|
|
Shock absorber condition.
|
|
|
Condition of wheel and rim.
|
|
|
All of the above.
|
12.
When checking your tires during a pre-trip inspection, which of the following is acceptable?
|
Cracks in the tires
|
|
|
Tires made by different manufacturers
|
|
|
Dual tires that come in contact with parts of the vehicle
|
|
|
Mismatched sizes
|
13.
When taking the road test, if asked to make a turn you should:
|
slow down before making the turn.
|
|
|
use turn signals.
|
|
|
check for traffic in all directions.
|
|
|
All of the above.
|
14.
When checking the condition of wheels and rims during the pre-trip inspection, make sure that:
|
the end of the kingpin is even with the top of the fifth wheel.
|
|
|
no more than two lug nuts are missing.
|
|
|
no studs, spacers, clamps, or lugs are missing, bent, or broken.
|
|
|
All of the above.
|
15.
You are checking the dipstick to see that the oil level is within the safe operating range. The level must be:
|
below the power steering fluid level.
|
|
|
above the coolant level.
|
|
|
above the refill mark.
|
|
|
below the refill mark.
|
16.
In a vehicle inspection, all lug nuts should:
|
show no signs of looseness.
|
|
|
be free of distortions.
|
|
|
be free of cracks.
|
|
|
All of the above.
|
17.
When approaching a vehicle as part of a pre-trip inspection, which of the following could be a sign of trouble?
|
Fresh oil under the vehicle
|
|
|
Parking brake is on
|
|
|
Inflated tires
|
|
|
All of the above
|
18.
Which of the following is NOT a tire problem to look for during the vehicle inspection?
|
Recapped tires on the front of a school bus
|
|
|
Radial and bias-ply tires used together
|
|
|
All the tires are made by the same manufacturer
|
|
|
Cracked valve stems
|
19.
To check the signal lights, do the following:
|
Turn off all the lights, turn on the stop lights, and turn on the left turn signal lights.
|
|
|
Turn on the stop lights, turn on all the lights, and turn on the right turn signal lights.
|
|
|
Turn off all the lights, turn on the right turn signal lights, and turn on the stop lights.
|
|
|
Turn on all the lights, turn off the stop lights, and turn off the left turn signal lights.
|
20.
When performing the stop/start maneuver during the skills test, you should:
|
decelerate smoothly.
|
|
|
apply the brakes as hard as you can without locking the wheels.
|
|
|
activate your left turn signal.
|
|
|
not use your turn signals.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More