View instructions
Rhode Island requires a special license to operate a motorcycle. To earn your motorcycle license, you must complete a motorcycle safety course provided by the Community College of Rhode Island.
1.
Drivers on an entrance ramp may not see you on the highway. What should you do?
Change to another lane
if one is open.
|
|
If there is no room for a
lane change, adjust speed to open up
space for the merging driver.
|
|
Give them plenty of room.
|
|
All of the above.
|
2.
When preparing to pass, you can increase your line of sight by:
staying in the center lane position.
|
|
reducing your speed.
|
|
swerving from side to side.
|
|
riding in the left lane position
|
3.
When riding in a group, motoryclists should ride in a single-file formation:
when entering a highway.
|
|
in school zones.
|
|
on highways.
|
|
at all times.
|
4.
In the 'Evaluate' step of the SEE strategy, you must have a plan to reduce risks, particularly when faced with:
potholes, guardrails,
bridges.
|
|
traffic signals and warning signs.
|
|
vehicles that may move into your path.
|
|
All of the above.
|
5.
When you have a tire failure, you must remember to:
pull the engine kill switch.
|
|
avoid using the brake of the flat tire.
|
|
use the flat tire brake only.
|
|
slow down with both brakes.
|
6.
In slow tight turns, counterbalance the motorcycle by:
leaning with the motorcycle.
|
|
keeping your body straight.
|
|
leaning forward.
|
|
leaning in the opposite direction of the motorcycle.
|
7.
Motorcycles riders should avoid riding on
big buildups of oil and grease usually found:
on multilane highways
|
|
on gravel roads
|
|
on slippery surfaces
|
|
at busy intersections
|
8.
To keep other vehicles from sharing your lane:
ride closer to the center portion of the lane.
|
|
sound your horn.
|
|
change lanes often.
|
|
flash your brake light.
|
9.
When being passed by another vehicle, avoid being hit by:
blasts of wind.
|
|
objects thrown from windows.
|
|
extended side mirrors.
|
|
All of the above.
|
10.
Motorcycles handle better on surfaces with good traction. Surfaces that provide poor traction include:
lane markings, steel plates and manhole covers.
|
|
mud.
|
|
gravel roads.
|
|
All of the above.
|
Page 1 of 3
Next page
Grade this page