CDL VEHICLE INSPECTION TEST SOUTH CAROLINA
11.
If you are checking that the air hoses and electrical lines are not spliced, cut, chafed or worn, you are inspecting:
|
the mounting bolts.
|
|
|
the locking jaws.
|
|
|
the exhaust system.
|
|
|
the air / electric lines.
|
12.
Which of the following is true about the skills test?
|
It doesn't matter what vehicle you use to take these tests.
|
|
|
You must take the skills tests in a vehicle that has components marked or labeled.
|
|
|
You don't have to take the skills tests in the type of vehicle for which you wish to be licensed.
|
|
|
You must take the skills tests in the
type of vehicle for which you wish to be licensed.
|
13.
When checking tires, which of the following is acceptable?
|
Dual tires that come in contact with each other
|
|
|
Dual tires that do not come in contact with each other
|
|
|
Retreaded tires on the front wheels of a bus
|
|
|
Radial and bias-ply tires used together.
|
14.
When taking the road test, you must do all of the following except:
|
Tell the examiner where you'd like to drive
|
|
|
Obey all traffic signs
|
|
|
Wear your safety belt
|
|
|
Drive in a safe and responsible manner
|
15.
How can you check slack adjusters?
|
Use gloves and pull hard on each slack adjuster that you can reach.
|
|
|
Wait for normal air pressure, release the parking brake, move the vehicle forward, and apply the brakes firmly using the brake pedal.
|
|
|
Turn the electrical power on and step on and off the brake pedal.
|
|
|
Check that the spring brakes come on automatically.
|
16.
Rust around wheel nuts may mean:
|
the nuts are loose.
|
|
|
the nuts are too tight.
|
|
|
the wheels or rims have had welding repairs.
|
|
|
the weather is wet.
|
17.
During the driving test, when approaching a railroad crossing, you should _________ while your vehicle is in the crossing.
|
change lanes
|
|
|
pass slow moving vehicles
|
|
|
not change gears
|
|
|
None of the above.
|
18.
If you are looking for puddles on the ground and dripping fluids on the underside of the engine and transmission, you are checking for:
|
Leaks
|
|
|
Oil level
|
|
|
Coolant level
|
|
|
None of the above.
|
19.
To check the automatic transmission fluid:
|
the wheel nuts must be loose.
|
|
|
you should turn the engine off.
|
|
|
the engine may have to be running.
|
|
|
you must go down grades.
|
20.
Which of the following is NOT part of a standard vehicle inspection?
|
Seating defects.
|
|
|
Tire problems.
|
|
|
Wheel and rim problems.
|
|
|
Bad brake drums or shoes.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More